Vapour Tight Tank Packages

Buy or lease with fast professional setup anywhere in Alberta, Saskatchewan, or Northeastern British Columbia

Vapour tight tank and positive pressure production packages are used in sweet and sour oil production and storage, in addition to well testing. The components of our tank packages are containment-exempt and are considered process vessels in accordance with Alberta’s Guide 55 (also known as AER Guide 55) and Saskatchewan Upstream Storage Standards S-01. While our vapour tight tank packages include flares, separators, and knockouts, you can also rent or buy these components separately if you already have equipment in place that you need to add to or replace. 

Packages

Tank Packages Containment-Exempt for AB & SK Regulations

Vapour tight tank and positive pressure production packages are used in sweet and sour oil production and storage, in addition to well testing. The components of our tank packages are containment-exempt and are considered process vessels in accordance with Alberta’s Guide 55 (also known as AER Guide 55) and Saskatchewan Upstream Storage Standards S-01. While our vapour tight tank packages include flares, separators, and knockouts, you can also rent or buy these components separately if you already have equipment in place that you need to add to or replace. 

Setup icon

Oil & Gas equipment rental and setup is all we do

We have all of the equipment you need, but more importantly we have the expertise to set it up properly. If you are calling us to a remote well site and aren’t there to supervise, you can count on our ability to get it done right and on time, every time. We aren’t part of a massive international company that needs to hire outside contractors to get your job done – we’re on the ground where it counts as a local business, and understand the terrain and different production and exploration setups. Our business has taken us from Zama Lake AB to Carnduff SK and many other oil and gas exploration all over Western Canada. We take care to ensure that all tanks are production-ready when shipped out to your site, including cleaning, inspecting, and recalibrating.

Rent icon

Options include rent, buy, or rent to own

We offer payment plans to suit any company’s budget, with the majority of our business being done in rentals. You can also choose a rent to own plan or to buy the equipment outright at any time during the course of your rental. 

Contact us today​

To get the tank package you need up and running now! 

Vapour Tight Tank Package Specifications

Storage Tank Flare System Metering and Controls Piping Burner System
400-850 BBL, 14.7 PSI operating pressure
4” x 40’ guyed flare stack
2” inlet with 600 ANSI ESD
200’ of 2” schedule 80 flow line with 2000# hammer unions
500,000 BTU burner with fire-tube and chimney
Internally coated
3 cement anchor blocks and guy wires
3” SR meter run and 2 pen recorder
2” swing
ACL burner management system
All internal piping and projections are standard wall 304SS
3” flame arrestor
3” 150# detonation arrestor w/304SS cell
160’ of 3” schedule 40 flare line with 1000# hammer unions
B149.3 compliant
3” Pressure/Vacuum Pipe Away Relief Vent
Retractable propane pilot system with regulator and hose
3” Kimray backpressure control valve
4- 2” flex lines with hammer unions, 150 ANSI flanges and bolt up kits
High level and high pressure shutdowns
6” x 30” fuel gas scrubber
Wood blocks for flow line and flare line
Load box
Complete piping and instrumentation inside enclosure
2-3” valves with camlocks on load lines
12” x 24” propane catalytic heater
3” x 12” planks for under tank skid

Positive Pressure Production Package Specifications

Storage Tank Flare System Metering and Controls Piping Burner System
400-850 BBL, 14.7 PSI operating pressure
Dual flare stack
24” x 5’ sour inlet separator ranging from 250 to 1440 PSI
200’ of 2” schedule 80 flow line with 2000# hammer unions
500,000 BTU burner with fire-tube and chimney
Internally coated
4” x 40’ guyed flare stack with 2” low pressure riser
2” inlet with 600 ANSI ESD
2” swing
ACL burner management system
All internal piping and projections are standard wall 304SS
3 cement anchor blocks and guy wires
2” JR meter run w/bypass and 2 pen recorder
320’ of 2” schedule 40 flare line with 1000# hammer unions
B149.3 compliant
3” Pressure/Vacuum Pipe Away Relief Vent
3” flame arrestor
High level shut down and high pressure shutdowns
4- 2” flex lines with hammer unions, 150 ANSI flanges and bolt up kits
2” 150# detonation arrestor w/304SS cell
Retractable propane pilot system with regulator and hose
6” x 30” fuel gas scrubber
Wood blocks for flow line and flare line
High level and high pressure shutdowns
Complete piping and instrumentation inside enclosure
Load box
12” x 24” propane catalytic heater
2-3” valves with camlocks on load lines
3” x 12” planks for under tank skid

Check out our reality web series to see exactly how we do business.

Copyright © 2018 OSY Rentals.

OSY Rentals is an oilfield rental and sales company specializing in Vapour Tight Tank Packages, flares, knockouts and separators. Currently expanding our operations, we’re focused on providing the western Canadian oil and gas industry with safe and timely service, quality solutions and technical excellence when it comes to process equipment.

Affiliate Company

Rival Hydrovac
To Top